Gigabyte GA-MA790FX-DS5 Manual - Page 45

OnChip SATA Controller (AMD SB600 chip) Enables or disables the integrated SATA controller. (Default: Enabled) OnChip SATA Type (AMD SB600 chip) Configures the operating mode of the integrated SATA controller. Native IDE Allows the SATA controller to operate in Native IDE mode. (Default) Enable Native IDE mode if you wish to install operating systems that support Native mode, e.g. Windows XP/2000. RAID Enables RAID for the SATA controller. Legacy IDE Allows the SATA controller to operate in Legacy IDE mode. In Legacy mode the SATA controller uses dedicated IRQs that cannot be shared with other device. Set this option to Legacy IDE if you wish to install operating systems that do not support Native mode, e.g. Windows 9X/ME SATA ->AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. For more information about AHCI, please visit Intel's website. OnBoard PCIE Device CMOS Setup Utility-Copyright (C) 1984-2007 Award Software OnBoard PCIE Device Onboard LAN Function Onboard LAN Boot ROM ` SMART LAN Onboard ESATA-II Ctrl Onboard ESATA-II Ctrl Mode Onboard GSATA-II Ctrl Onboard GSATA-II Ctrl Mode [Enabled] [Disabled] [Press Enter] [Enabled] [IDE] [Enabled] [IDE] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Onboard LAN Function Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) - 45 - BIOS Setup