Gigabyte GA-MA790GPT-UD3H Manual - Page 42

DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2009 Award Software DRAM Configuration DCTs Mode DDR3 Timing Items x CAS# latency x RAS to CAS R/W Delay x Row Precharge Time x Minimum RAS Active Time x 1T/2T Command Timing x TwTr Command Delay x Trfc0 for DIMM1 x Trfc2 for DIMM2 x Trfc1 for DIMM3 x Trfc3 for DIMM4 x Write Recovery Time x Precharge Time x Row Cycle Time x RAS to RAS Delay CHA ProcOdt CHA DQS drive strength CHA Data drive strength [Unganged] [Auto] SPD Auto 7T Auto 7T Auto 7T Auto 30T Auto -- Auto 5T Auto 90ns Auto -- Auto -- Auto -- Auto 10T Auto 5T Auto 28T Auto 4T [Auto] [Auto] [Auto] Auto 7T 7T 7T 30T -5T 90ns ---10T 5T 28T 4T 60 ohms 1.0x 1.0x Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2009 Award Software DRAM Configuration CHA MEMCLK drive strength CHA Add/Cmd drive strength CHA CS/ODT drive strength CHA CKE drive strength CHB ProcOdt CHB DQS drive strength CHB Data drive strength CHB MEMCLK drive strength CHB Add/Cmd drive strength CHB CS/ODT drive strength CHB CKE drive strength Bank interleaving Channel interleave [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Enabled] [Enabled] 1.5x 1.5x 1.5x 1.5x 60 ohms 1.0x 1.0x 1.5x 1.5x 1.5x 1.5x Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults DCTs Mode Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable. Options are: Auto (default), Manual. CAS# latency Options are: Auto (default), 4T~12T. RAS to CAS R/W Delay Options are: Auto (default), 5T~12T. BIOS Setup - 42 -