Gigabyte GA-N650SLI-DS4 Manual - Page 41

English 2-3 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Integrated Peripherals SATA-II RAID Config On-Chip IDE Channel0 IDE DMA transfer access On-Chip MAC Lan Onboard LAN Boot ROM On-Chip IDE Channel1 NV Serial-ATA Controller IDE Prefetch Mode On-Chip USB USB Keyboard Support USB Mouse Support Onboard Audio Function SMART LAN Onboard 1394 Legacy USB storage detect Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA [Press Enter] [Enabled] [Enabled] [Auto] [Disabled] [Enabled] [All Enabled] [Enabled] [V1.1+V2.0] [Disabled] [Disabled] [Auto] [Press Enter] [Enabled] [Enabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults SATA-II RAID Config CMOS Setup Utility-Copyright (C) 1984-2007 Award Software SATA-II RAID Config SATA-II RAID function x SATA-II 1 Primary RAID x SATA-II 1 Secondary RAID x SATA-II 2 Primary RAID x SATA-II 2 Secondary RAID [Disabled] Enabled Enabled Enabled Enabled Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults SATA-II RAID function Enabled Allows users to configure individual SATA channels as RAID or ATA mode. Disabled Disable the RAID function for all of the onboard SATA channels. (Default value) SATA-II 1 Primary RAID Enabled Enable RAID function for the first channel of the first SATA 3Gb/s controller. (Default value) Disabled Disable this function. SATA-II 1 Secondary RAID Enabled Enable RAID function for the second channel of the first SATA 3Gb/s controller. (Default value) Disabled Disable this function. - 41 - BIOS Setup