Gigabyte GA-P35-DS3P Manual - Page 92
GIGABYTE SATA2 controllers, Load Driver
UPC - 818313003362
View all Gigabyte GA-P35-DS3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
English GIGABYTE SATA2 controllers: Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID/AHCI hard drive(s) will not be detected at this stage), select Load Driver. (Figure 12). Figure 12 Step 2: Specify the location where the driver is saved, such as your floppy disk (Figure 13). Figure 13 GA-P35-DS3P Motherboard - 92 -
GA-P35-DS3P Motherboard
- 92 -
English
GIGABYTE SATA2 controllers:
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears (RAID/AHCI hard drive(s) will not be detected at this
stage), select
Load Driver
. (Figure 12).
Figure 12
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 13).
Figure 13