Gigabyte GA-P61A-D3 Manual - Page 33
USB3.0 Support Etron EJ168 USB 3.0 Controllers, SATA Mode Selection Intel H61 Chipset
View all Gigabyte GA-P61A-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
&& LAN PXE Boot Option ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) && SATA Controller(s) (Intel H61 Chipset) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection (Intel H61 Chipset) Allows you to decide whether to configure the SATA controllers integrated in the Intel H61 Chipset to AHCI mode. IDE Configures the SATA controllers to IDE mode. (Default) AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. && USB Controller Enables or disables the USB 2.0 controllers integrated with the Intel H61 Chipset. (Default: Enabled) && Audio Controller Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express graphics card. Auto Lets BIOS automatically configure this setting. (Default) PEG Sets the PCI Express graphics card on the PCIEX16 slot as the first display. PCI Sets the PCI graphics card as the first display. && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && USB3.0 Support (Etron EJ168 USB 3.0 Controllers) Enables or disables the Etron EJ168 USB 3.0 controllers. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Enabled) && USB Storage Devices Displays a list of connected USB mass storage devices. You can configure how each device is going to be treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto) - 33 -