Gigabyte GA-P61A-D3 Manual - Page 34
Super IO Configuration, Marvell ATA Controller Configuration, Serial Port A, Parallel Port - raid
View all Gigabyte GA-P61A-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
`` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port and parallel port. && Serial Port A Enables or disables the onboard serial port. (Default: Enabled) && Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) `` Marvell ATA Controller Configuration && GSATA Controller (Marvell 88SE9172 Chip, GSATA3 4 and GSATA3 5 connectors) Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or configures the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports. IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE mode. (Default) AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID Mode Enables RAID for the SATA controllers. Disabled Disables the SATA controllers. - 34 -