Gigabyte GA-P67A-UD4 Manual - Page 93
B. Installing Windows 7/Vista, For the Marvell 88SE9128, Marvell 91xx SATA, Controller 32bit Driver
UPC - 818313012319
View all Gigabyte GA-P67A-UD4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
For the Marvell 88SE9128: Insert the floppy disk containing the SATA AHCI driver and press . The screen will display two drivers, both of which need to be installed (Figure 2). First select Marvell shared library (install first) and press . On the next screen, press to return to the screen in Figure 2. Then select Marvell 91xx SATA Controller 32bit Driver and press . When both of the two drivers appear on the confirmation screen, press to continue the driver installation. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Marvell shared library (install first) Marvell 91xx SATA Controller 32bit Driver ENTER=Select F3=Exit Figure 2 Step 3: On the next screen, press to continue the driver installation. After the driver installation, you can proceed with the Windows XP installation. B. Installing Windows 7/Vista As Windows 7 and Vista already include SATA RAID/AHCI controller driver, you do not need to install separate RAID/AHCI driver during the Windows installation process. After the operating system is installed, we recommend that you install all required drivers from the motherboard driver disk using "Xpress Install" to ensure system performance and compatibility. - 93 - Appendix