Gigabyte GA-X48-DQ6 Manual - Page 16
Installing the Crazy Cool Heatsink on the Back of the Motherboard
UPC - 818313004925
View all Gigabyte GA-X48-DQ6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1-3-3 Installing the Crazy Cool Heatsink on the Back of the Motherboard Please follow the steps below to install the Crazy Cool heatsink provided with the motherboard. The Crazy Cool Heatsink/Screws • Use extreme care when installing or removing the Crazy Cool heatsink. The user shall be responsible for damage of motherboard function(s) or component(s) resulting from the removal of the Crazy Cool heatsink. • Always keep the removed screws in a safe place. Please prepare: 1. A Philips screwdriver 2. The Crazy Cool heatsink and three screws provided with the motherboard Step 1: Unfasten the two bolts holding the North Bridge heatsink (as shown in the picture to the left) and remove the bolts. Remove the back plate from the back of the motherboard. Step 3: On the front side of the motherboard, align the the two bolts removed in Step 1 with the nuts on the Crazy Cool heatsink and then fasten the bolts tightly. Step 2: Affix the Crazy Cool heatsink to the back of the motherboard. Step 4: As shown, align the three provided screws with the mounting holes on the motherboard and the Crazy Cool heatsink and then tighten the screws to complete the Crazy Cool installation. (Note) The components received may vary in appearance from the ones illustrated above. GA-X48-DQ6 Motherboard - 16 -