Gigabyte GA-Z270N-WIFI Users Manual - Page 8

USB Internal Connectors Back Panel Connectors I/O Controller Hardware Monitor BIOS Š Chipset: - 2 x USB 2.0/1.1 ports available through the internal USB header - 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) - 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 1 support Š 1 x 24-pin ATX main power connector Š 1 x 4-pin ATX 12V power connector Š 6 x SATA 6Gb/s connectors Š 1 x M.2 Socket 3 connector on the back of the motherboard Š 1 x CPU fan header Š 1 x system fan header Š 1 x front panel header Š 1 x front panel audio header Š 1 x USB 3.1 Gen 1 header Š 1 x USB 2.0/1.1 header Š 1 x S/PDIF Out header Š 1 x speaker header Š 1 x Clear CMOS jumper Š 1 x chassis intrusion header Š 1 x PS/2 keyboard/mouse port Š 2 x HDMI ports Š 2 x SMA antenna connectors (2T2R) Š 1 x DVI-D port Š 4 x USB 3.1 Gen 1 ports Š 1 x USB Type-C™ port, with USB 3.1 Gen 1 support Š 2 x RJ-45 ports Š 1 x optical S/PDIF Out connector Š 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) Š iTE® I/O Controller Chip Š Voltage detection Š Temperature detection Š Fan speed detection Š Overheating warning Š Fan fail warning Š Fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. Š 2 x 128 Mbit flash Š Use of licensed AMI UEFI BIOS Š Support for DualBIOS™ Š PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 - 8 -