Gigabyte GA-Z270X-Gaming K7 Users Manual - Page 31
M2M_32G/M2P_32G M.2 Socket 3 Connectors, Slide the M.2 SSD into the connector at an angle.
View all Gigabyte GA-Z270X-Gaming K7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
_ _B _F 3 _ _B 12) M2M_32G/M2P_32G (M.2 Socket 3 Connectors) The M.2 connectors support M.2 SATA SSDs and M.2 PCIe SSD_s0and Fsupport RAID configuration through the Intel® Chipset. Please note that an M.2 PCIe SSD cannot be used to create a RAID set either with an M._2 SATA SSD or a SATA hard drive. To creBateS_a RAID array with an M.2 PCIe SSD, you must set up B B the configuration in UEFI BIOS mode. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. S B_ B 110 80 60 42 _S 80 60 42 S_ _ B Follow the steps below to correctly install an M.2 SSD in the M.2 connector. _U _ F B M2M_32G S S M2P_32G F_USB3 F Step 1: Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole for the M.2 SSD to be installed and then screw the nut first. _0 Step 2: Slide the M.2 SSD into the connector at an angle. _F _0 F Step 3: Press the M.2 SSD down and then secure it with the screw. Step 4: The installation is completed, as shown in the picture above. Select the proper hole for the M.2 SSD to be installed and refasten the screw and nut. - 31 - Hardware Installation