Gigabyte GA-Z270X-Gaming K7 Users Manual - Page 57
Peripherals, OnBoard LAN Controller Rivet Networks Killer
View all Gigabyte GA-Z270X-Gaming K7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
2-6 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the first display. PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) PCIe 2 Slot Sets the graphics card on the PCIEX8 slot as the first display. PCIe 3 Slot Sets the graphics card on the PCIEX4 slot as the first display. && OnBoard LAN Controller (Rivet Networks Killer™ E2500 LAN Chip, LAN2) Enables or disables the Rivet Networks Killer™ E2500 LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. && EZ RAID Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. && LED_C Connect Enables or disables the lights of the RGB (RGBW) LED strip connected to the LED_C header on the motherboard. (Default: Enabled) && RGB Fusion Allows you to set the LED lighting mode for the motherboard. Off Disables this function. Pulse Mode All LEDs simultaneously fade in and fade out. Color Cycle All LEDs simultaneously cycle through a full spectrum of colors. Static Mode All LEDs emit a single color. (Default) Flash Mode All LEDs simultaneously flash on and off. && Intel Platform Trust Technology (PTT) Enables or disables Intel® PTT Technology. (Default: Disabled) - 57 - BIOS Setup