Gigabyte GA-Z68X-UD3R-B3 Manual - Page 91
Create a RAID Array, Create VD, Step 1: On the main screen, press <Enter> on
View all Gigabyte GA-Z68X-UD3R-B3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Create a RAID Array: Step 1: On the main screen, press on the RAID tab. Then the RAID Config menu appears (Figure 4). Press on the Create VD item. Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. [ Selection] [ Adapter] [ Devices] [ RAID ] RAID Config Create VD Delete VD Wipe out disk Spare Management ENTER/SPACE: Select, ESC: Back/Exit Figure 4 Step 2: The next screen displays the two hard drives you installed. Press or on the two hard drives respectively to add them into the RAID array. Selected hard drives are marked with an asterisk (Figure 5). Then press on NEXT. [ Selection] Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. [ Adapter] [ Devices] [ RAID ] Select free disks to create Port Disk Name * S0 SATA: WDC WD800JD-22LSA0 * S1 SATA: WDC WD800JD-22LSA0 NEXT RAID Config Size 76.3GB 76.3GB Max Speed Status SATA 3Gb/s FREE SATA 3Gb/s FREE ENTER/SPACE: Select, ESC: Back/Exit Figure 5 - 91 - Appendix