Gigabyte GA-Z68XP-UD4 User Manual - Page 10

1-2 Product Specifications CPU ŠŠ Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package (Go to GIGABYTE's website for the latest CPU support list.) ŠŠ L3 cache varies with CPU Chipset ŠŠ Intel® Z68 Express Chipset Memory Onboard Graphics Audio ŠŠ 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. ŠŠ Dual channel memory architecture ŠŠ Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules ŠŠ Support for non-ECC memory modules ŠŠ Support for Extreme Memory Profile (XMP) memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) ŠŠ Integrated Graphics Processor: - 1 x HDMI port, supporting a maximum resolution of 1920x1200 ŠŠ Realtek ALC889 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel ŠŠ Support for Dolby® Home Theater ŠŠ Support for S/PDIF Out LAN ŠŠ 1 x Realtek RTL8111E/F chip (10/100/1000 Mbit) Expansion Slots ŠŠ Š Š Multi-Graphics ŠŠ Technology Storage Interface ŠŠ 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed,  be sure to install it in the PCIEX16 slot. 1 x PCI Express x16 slot, running at x8 (PCIEX8) * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode. (The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.) * To support PCI Express 3.0, you must install an Intel 22nm CPU. 2 x PCI Express x1 slots (The PCI Express x1 slots conform to PCI Express 2.0 standard.) 2 x PCI slots Support for AMD CrossFireX™/NVIDIA SLI technology * The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX™/NVIDIA SLI is enabled. Chipset: - 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. Hardware Installation - 10 -