Gigabyte GH-PDU22-SC Installation Guide - Page 6

English Installation Instructions for P4 LGA775RM & Cooler Side A Side B ARM CAM Figure 1 Plastic Washers Figure 2 Figure3- 1 GH-PDU22-SC Figure3-2 To install GH-PDU22-SC on LGA775 motherboard needs both LGA775 RM & P4 clips. Please add an adequate layer of heat sink paste on the surface of the CPU. Figure 1 Place the LGA775RM onto the LGA775 motherboard so that side A is parallel with ARM and side B is parallel with CAM. Figure 2 From the underside of the motherboard, use screws (4) and plastic washers (4) together to secure the LGA775RM into place.. Figure 3 Gently push down on the cooler unit to lock it into position. (Figure3-1).Connect the 3-pin connector to the CPU fan connector on the motherboard.(Figure 3-2).Installation is now complete. If fan speed control is required, please refer to "Installation of the Fan Speed Control Cable". Note: About P4 Clips installation, please refer to "Installation Instructions for Intel® Pentium®4 mPGA478 Clips" - 6 -