Gigabyte GH-PDU22-SC Installation Guide - Page 7

English Installation Instructions for Intel® Pentium® 4 mPGA478 Clips Figure 1-1 C B Figure 1-2 A Figure 2 Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU(Figure1-1). Figure 1-2 showing the correct installation of the cooler atop the CPU. Figure 2 Clip introduction-Part A: Secured to the retention mechanism hook. Part B: Tightly contact the cooler bracket. Part C: Secured to the retention mechanism hook. Figure 3-1 Figure 3-2 Figure 4 Figure 3 Secure Parts A, B, and then C of the clip to the retention mechanism. Assure that Part C is secured to the retention mechanism hook on the same side as the heat pipes. Figure 4 Connect the 3-pin connector to the CPU fan connector on the motherboard. Clips Installation is now complete. If fan speed control is required, please refer to "Installation of the Fan Speed Control Cable". - 7 - GH-PDU22-SC