Gigabyte GS-R22PXL Manual - Page 34
Hardware Installation
View all Gigabyte GS-R22PXL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
37 PCIE_5 38 BAT 39 PCIE_4 40 CLR_CMOS 41 PCIE_3 42 IPMB 43 PCIE_2 44 BMC_LED1 45 TPM_MEZZ1 46 PCIE_1 47 DDR3_P1_D0 48 DDR3_P1_D1 49 DDR3_P1_E0 50 DDR3_P1_E1 51 DDR3_P1_F0 52 DDR3_P1_F1 PCI-E slot 5 (x4 slot / x1 signal) Battery socket PCI-E slot 4 (x8 slot / x4 signal) Clear CMOS jumper PCI-E slot 3 (x8 slot / x4 signal) IPMB connector PCI-E slot 2 (x16 slot / x16 signal) BMC firmware readiness LED TPM connector PCI-E slot 1 (x16 slot / x16 signal/From secondary CPU) Channel 1 slot 0 (for secondary CPU) Channel 1 slot 1 (for secondary CPU) Channel 2 slot 0 (for secondary CPU) Channel 2 slot 1 (for secondary CPU) Channel 3 slot 0 (for secondary CPU) Channel 3 slot 1 (for secondary CPU) CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed and set to 2-3 pins (Normal mode), in order to reduce any risk of hard disk damage. Please refer to the following for SATA2_D and SATA3_D jumper setting instruction. Hardware Installation - 34 -