Gigabyte GS-R22T61 Manual - Page 67
Serial ATA, SATA Port 0/1/2/3/4/5
View all Gigabyte GS-R22T61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
GS-R22T61-RH/GS-R22T81-RH Rack Mount Server Serial ATA Enabled Disabled Enables on-board serial ATA function. (Default setting) Disables on-board serial ATA function. Native Mode Operation This option allows user to set the native mode for Serial ATA function. Auto Auto detected. (Default setting) Serial ATA Set Native mode to Serial ATA. SATA Controller Mode Option Compatible Mode SATA and PATA drives are auto-detected and placed in Legacy mode. Enhanced Mode SATA and PATA drives are auto-detected and placed in Native mode. (Default setting) Note: Pre-Win2000 operating system do not work in Enhanced mode. SATA RAID Enable Enabled Disabled Enabled SATA RAID function. Disable this function. (Default setting) SATA AHCI Enable Enabled Disabled Set this item to enable SATA AHCI function for WinXP-SP1+IAA driver supports AHCI mode. Disabled this function. (Default setting) SATA Port 0/1/2/3/4/5 The category identifies the types of Serial SATA hard disk from drive 0 to 5 that has been installed in the computer. System will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. Hard drive information should be labled on the outside device casing. Enter the appropriate option based on this information. TYPE 1-39: Predefined types. Users: Set parameters by User. 67