Gigabyte GV-N98TZL-1GH Manual - Page 10

Step 4. To connect an HDMI TV, use either Method A or Method B below (depending on your motherboard design) to enable the S/PDIF in function for the graphics card. It is recommended Method A be used on motherboards that have a free S/PDIF header. Method A (via the S/PDIF out header): Connect the provided S/PDIF cable to the graphics card and the S/PDIF out header on your motherboard (the red wire connects to the S/PDIF out pin and the black to the Ground pin). A-1. Connect the S/PDIF cable to the graphics card A-2. Connect the S/PDIF cable to the motherboard. Method B (via the coaxial S/PDIF out jack): Connect the GIGABYTE video adapter to the TVOut port on the graphics card. Insert one end of the SPDIF coaxial cable (optional) into the S/PDIF in jack on the adapter and the other end into the coaxial S/PDIF out jack on your motheboard. B-1. Connect the GIGABYTE video adapter to the TVOut port on the graphics card B-2.Connect the SPDIF coaxial cable (optional) to the video adapter and motherboard You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. GV-N98TZL-1GH/512H Graphics Accelerator - 10 -