Gigabyte GV-NX73L128D-RH Manual - Page 9
Locate one PCI Express x 16 slot. If - drivers
View all Gigabyte GV-NX73L128D-RH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English To install your new graphics card: 1. Locate one PCI Express x 16 slot. If necessary, remove the metal cover from the slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. * Please make sure that the gold edge connectors of the graphics card is securely inserted. 2. Replace the screws to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display To TV/VCR You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation