Gigabyte GV-NX78X512VP-B Manual - Page 16

English C. Introduction of the capture sources device Please check out your capture source. In general, the media sources comprise the following item: 1. Video Tape Recorder (VCR), V8 : Connect the AV connector or video cable of the VCR to the Video In of the video capture card. And if your VCR, V8 supports S-Video output, connect S-Video connector to the S-Video In port of the graphics card. Connect the audio cable of the VCR, V8 to the Line In of the sound card. If your sound card has no Line In port, try the Microphone port. 2. DV (recommend to use IEEE1394 card) DV (Check out if the power of DV is turned on, and enter VCR mode; moreover, make sure FireWire cable connect well. Furthermore, when capturing media by VIVO-based graphics card, you could chose two ways(Note), including Composite (COMP-IN) and SVideo(SVID-IN). Afterward please click the play button of captured devices, and click the red REC button between Capture preview window and Capture device selection area. Please verify how your cable connects. If the cable connects to SVID-IN port on HDTV/VIVO cable, please press the "Video" button (Figure 2), and please select the "Video SVideo" item (Figure 2); if it connects to COMP-IN port on HDTV/VIVO cable, please select the "Video Composite" item (Figure 3). Figure 2 Figure 3 When you got the media you need, click the red REC button again to stop capturing. And then the media clips will be loaded into Capture clips area automatically. (Figure 4) Figure 4 GV-NX78X512VP-B Graphics Accelerator - 16 -