Gigabyte GV-RX24P256HE Manual - Page 7

English To install your new graphics card: 1. Locate a PCI Express x16 slot. If necessary, remove the metal cover from the slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. * Pleasemakesurethatthegoldedgeconnector of the graphics card is securely inserted. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below. Or use the DVI-I-to-HDMI adapter to connect an HDMI monitor. To D-Sub Monitor To TV/VCR To Flat Panel Display Connect an HDMI monitor via DVI-I to HDMI adapter You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation