Gigabyte GZ-FA2CA-AJB User Manual - Page 12

English 4-5 Connection of Fan Power Cable This chassis has 1 x 12cm silent blue LED cooling fan at the front and 2 x 12cm silent blue LED fans at the rear. There are internal connectors that connects the front and rear fans making it into a single 3-pin power connector. 〔Required Tools: None〕 4-5.1 Insert the 3-pin connector into the system fan power connector on the motherboard. 4-6 Installation of 5.25" Front Device Bay Detach the front panel (see step 1-3.2 on page 6) and remove the front drive rail. Remove the corresponding EMI plate and attach the front panel onto the chassis. 6.1 6.2 2 Secure the 5.25" device with the internal latch. Refer to the figure for installation 1 Lock procedure. 6.3 6.4 Installation complete 4-7 Installation of 3.5" Front Device Bay Installation of 3.5" front device is the same as 5.25" front devices, please refer to step 4-6. 4-8 Installation of 3.5" Internal Device Bay This chassis provides a removable/dual directional HDD rack to accommodate up to 5 hard disc drives. 〔Required Tools: Thumbscrews (4 per hard disc drive)〕 Slide the HDD into the rack and secure the HDD with the thumbscrews. 8.1 8.2 12