Gigabyte GZ-FA2CA-AJB User Manual - Page 9

English 4. Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to set the chassis upright on the table. 〔Required Tools: Power supply securing screw x 4〕 1.1 Remove side panel (see step 1-3.1 on page 6). Place the power supply unit into the case. 1.2 Secure the power supply with the 4 securing screws. 1.3 When using a larger power supply unit, Please disassemble the cross bar by loosening the securing screws. Fasten the screws to secure the cross bar after the power supply is installed. 4-2 Installation of Motherboard This chassis supports ATX / Micro ATX / Flex-ATX / CEB motherboards. Please confirm the dimensions and fixing points of the motherboard prior to installation. 〔Required Tools: Copper stand offs, Motherboard screws〕 According to motherboard specifications, select proper screw points, screw in the copper stand offs into the corresponding points on the motherboard. Change the motherboard I/O bracket on the rear panel (supplied by the motherboard manufacturer). 2.1 2.2 Secure the motherboard with the motherboard screws (refer to your motherboard manual to check what type of motherboard you have). Motherboard Code name Motherboard screws case copper post ATX A1-A9 9 9 Micro ATX U1-U9 9 9 Flex-ATX F1-F6 6 6 2.3 E-ATX E1-E12 12 12