Graco 1750295 User Guide - Page 18

Problem Movement alarm will not sound. Vibration Alarm is selected but is not working. Possible Cause Sensor Pad cord is not connected properly to the Nursery Unit. Nursery Unit is detecting movement when crib is being touched. Nursery Unit is detecting movement from outside the crib such as motorized devices, strong drafts, etc. Sensor Pad sensitivity level is set too high. Movement function is not selected. Units have lost connection with one another. The batteries are low in the Parents' Unit. The Parents' Unit is in the Charging Base. Solution Unplug and reconnect the cord. Avoid contact with the crib when monitor is on. Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement from outside the crib. Turn off crib mobile, fans, loud music or anything else that may cause vibrations. You may need to decrease the sensitivity. Refer to the Movement Sensitivity Adjustment section on Pg. 12. Make sure the Movement function is selected. The Movement symbol should appear. Reconnect units. Refer to the Parents' Unit and Nursery Unit Connection section on Pg. 13. Check or charge batteries in Parents' Unit. The Vibration Alarm does not work when the Parents' Unit is in the Charging Base. Take the Parents' Unit out of the Charging Base. No sound is being transmitted or received. Sound function is not selected. Voice Activation is on and the sensitivity level is too low. Make sure the Sound feature is selected. The Sound symbol should appear. Increase the sensitivity level. 18