Graco 3543835 Assembly Instructions - Page 8

A S S E M B L Y I N S T R U C T I O N S (continued) Step 5 Place the Restraint Harness(N) and align the hole on the Harness Strap end to the hole on the thick shelf (E).Attach the Strap to the shelf by inserting an Allen Head bolt (H) through a washer (I),the Strap(N) and the Shelf hole.Secure with a Nut (J) on the underside of the shelf, as shown in Figure 5. Repeat process to attach the other side of the strap to the shelf. E I H J N Model shown is example only. Styles may vary. Figure 5 NL Step 6 Place the Foam Pad(O) onto the Thick Shelf(E) on top of the attached strap from Step 5 ,as shown in Figure 6 . RESTRAINT HARNESS SYSTEM USE: . Place the infant on the Dressing/Changing Table Foam Pad. . Position the Restraint Harness over the middle of the infant's torso and insert the buckled ends into each other until they lock shut with a click. . Gently pull the loose end of the strap to lightly snug the Restraint Harness around the infant. ! WARNING: FALL HAZARD ALWAY KEEP CHILD WITHIN AN ARMS REACH. Figure 6 Model shown is example only. Styles may vary. LaJobi Industries. - 257 Prospect Plains Rd. Cranbury,NJ 08512-Phone: 888-266-2848 Bulletin No. A-DT00-00 8 PRINTED IN CHINA