HTC touch viva User Manual - Page 32
Charging the battery, To install a microSD card
View all HTC touch viva manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 Getting Started To install a microSD card 1. Remove the battery if it is installed. 3 2. Slide the microSD™ card holder down toward the bottom of the device, and then flip it up. 3. Insert the microSD card into the holder gold contacts-end first, and also with the gold contacts facing down. 2 4. Push the card holder down into place and slide it up to lock it. 1.3 Charging the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery. Note Only the AC adapter and USB sync cable provided with your device must be used to charge the device.