Haier 21FV6T User Manual - Page 4

FUNCTION BUTTONS AND EXTERNAL SOCKETS Figure A Antenna cable with a plug Figure C Coaxial cable(75Ω) Antenna Connection Connect an antenna to the antenna socket on Antenna the TV set,we recommend using a Cable TV system for better picture and audio quality. 1.If you use a coaxial cable(75Ω),insert the antenna plug (see figure C) into 75Ωsocket (see figure A). 2.If you use a twin-lead cable(300Ω),please shape the cable as figure D,and connect the leads to antenna adapter and then insert the Figure B antenna adapter into the 75Ωsocket.(see figure B) 75-300Ω Antenna adapter Power source wire connection Insert the power plug into AC outlet. Antenna feeder To install and to replace batteries of the remote control unit 1.Place the remote control unit with the face Figure D down, then open the battery cover of the unit. 2.Place the two"AA"size batteries, matching twin-lead cable(300Ω) the + and - signs on each battery to the + and -signs of the battery compartment. 3.Close the cover of the battery compartment. NOTE: (1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. (3)Always replace both batteries at the same time. (4)Do not use rechargeable batteries (Ni-cd) or mix battery types. (5)Never place batteries in a fire. Dispose of the batteries with your domestic rubbish collection. 3 FUNCTION BUTTONS AND EXTERNAL SOCKETS 1.Front panel (1)Remote sensor: let the remote (2) controller aim here, the TV set can receive remote control signal. (2)Power switch: press the button to (3) turn on the TV set ,press the button again to turn off the TV set. (1) (3)Power indicator: the indicator lights in standby status .The indicator glints when you use remote controller. (4)Menu button (5)Program up/down button (6)Volume up/down button (4) (7) MENU TV/AV -VOL+ -CH+ (7)TV/AV switch button (5) (6) 2. Audio and video rear connections (1) S-VIDEO input (2) AUDIO/VIDEO input (3) YUV-DVD component input (4) Antenna input (5) AUDIO/VIDEO output VIDEO L AUDIO R IN IN OUT 3 Y (4) VIDEO Cb L S-VIDEO AUDIO Cr R (1) (2) (3) (5) 4