Haier 21FV6T User Manual - Page 7

MULTI FUNCTION TIMER Multi Function Timer The TV set has in built a comprehensive timer that has five basic functions. 1.Clock 2.On time so that the TV set can be programmed to turn on at a certain time. 3.Off time to allow the TV set to turn off at the preset time. 4.Sleep timer to allow the TV set to turn off after 10 ~ 180 minutes. 5.Program remind timer, that displays an on- screen reminder prompt, when a program on a different channel is due to start. TIME CLOCK --:-- ON TIME --:-- ON-PROG 1 OFF TIME --:-- SLEEP TIMER --:-- REMIND TIME --:-- REMIND PROG 1 Note: The clock will only work in the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power switch on the front panel, the clock looses power and will need to be reset when the power is reconnected. Selecting the clock menu Press the MENU button continually until theTIME menu is displayed or press the yellow time button on the remote controller. 1.Clock (master timer clock) Press the CH+/- buttons to select CLOCK, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minute and the VOL +/- buttons to adjust the minute. 2.On time Press the CH+/- buttons to select ON TIME, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minutes and the VOL+/- buttons to adjust the minutes. Press the CH- button to select ON PROG and the VOL+/buttons to select the TV channel that the TV set will automatically turn on to. 3.Off time Press the CH+/- buttons to select OFF TIME, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minute and the VOL+/- buttons to adjust the minute. 4.Sleep timer Press the CH+/- buttons to select SLEEP TIMER, then press the VOL+ button 9 MULTI FUNCTION TIMER to adjust the amount of time before the TV set will automatically turn off. Each time the VOL+ button is pressed the sleep time will increase by 10 minutes. The maximum sleep time is 180 minutes. 5.Remind time Press the CH+/- buttons to select REMIND TIME, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minute and the VOL +/- buttons to adjust the minute. Press the CH- button to select REMIND PROG and the VOL +/- buttons to select the TV channel that the TV set will automatically remind you to turn to while watching another channel. PROGRAM NUMBER EXCHANGE Program Number Exchange This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers. Press the MENU button 6 times until the exchange menu is displayed. Press the CH+/- buttons until program 1 is selected. Use the VOL+/- buttons to select the channel number to be swapped. (I.E If you wish to exchange channel 2 and 4 PROG1 should = 2.) Press the CH+/- buttons until program 2 is selected. Use the VOL+/- buttons to select the channel number to be swapped. (I.E If you wish to exchange channel 2 and 4 PROG 2 should = 4.) Press the CH+/- buttons until EXCHANGE is selected. Press the VOL+ button to enable the exchange. EXCHANGE PROG 1 1 PROG 2 1 EXCHANGE 10