Haier AB092FCBHA User Manual - Page 4

Cautions Operation If ambient air humidity is high, water droplets may condense at the air outlet of the air conditioner during cooling or dehumidifying. Airflow speed change If the automatic mode is set for cooling, the airflow speed will decrease gradually as the room temperature approaches the set point. If the automatic mode is set for heating, the compressor will cease and the fan speed will reduce and then cease as the room temperature approaches the set point. Airflow speed will change automatically if the dehumidifying mode is set. Airflow adjustment During the cooling or dehumidifying process, it is recommended that the louver does not remain in the vertical position to avoid accumulation of frost at the air outlet. Compensation for power interruption (Applicable accordingly) If this function is set, the air conditioner will return to the original operating state after the power supply is interrupted and then resumed. Setting: When the power supply is connected and the remote control is activated (excluding timing and air supply modes), repeatedly pressing the Sleep button 10 times within 5 seconds will activate the compensation status after the buzzersounds 4 times. Inactivating: Repeatedly pressing the Sleep button 10 times within 5 seconds will deactivate the compensation status after the buzzer sounds twice. Caution: If the power supply is interrupted during the operation of the air conditioner with the compensation function set or the air conditioner is not in use, the airconditioner should be disconnected from the power source. 3