Haier AC282AFERA User Manual - Page 22
زÉÇÂ, ʲ¿ÁÂ, ´´ô²²Æ
View all Haier AC282AFERA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation of Indoor Unit ELECTRICAL WIRING HOW TO CONNECT WIRING TO THE TERMINALS A.For solid core wiring (or F-cable) (1)Cut the wire and with a wire cutter or wire-cutting pliers,then strip the insulation to about 15/16"(25mm) of expose the solid wire. (2)Using a screwdriver ,remove the terminal screw(s) on the terminal board. (3)Using pliers,bend the solid wire to form a loop suitable for the terminal screw. B.For strand wiring (1)Cut the wire and with a wire cutter or wire-cutting pliers,then strip the insulation to about 3/8"(10mm) of expose the solid wire. (2)Using a screwdriver ,remove the terminal screw(s) on the terminal board. Fig. 14 A. Solid wire B. Strand wire Loop Round terminal Strip 15/16"(25mm) Strip 15/16"(25mm) Insulation Screw with special washer Round terminal Terminal Wire board Wire Screw with special washer Round terminal HOW TO FIXED CONNECTION CORD AND POWER CABLE AT THE CORD CLAMP After passing the connection cord and power cable through the insulation tube, fasten it with the cord clamp, as shown in Fig.15 20