Haier BD-31 User Manual - Page 7

Location •The freezer should be placed on a • solid and flat surface with all packing materials removed to avoid vibration and noise. Do not tilt the freezer over 45°when the freezer is moved. The freezer shall be away from heat sources or direct sunlight. 0 0 • A reasonable space should be • Never place the freezer in an kept around the freezer for area with an ambient ventilation. temperature below zero. 0 ® • Never place the freezer near to • Never operate the freezer a water source. Clean and dry outdoors or in rain. any water splashes and stains with soft cloth. 0 ® Keys Indicates operations that should be avoided as damage to equipment or injury to the operator may result. Indicates operations that should be avoided as serious damage to equipment or fatal injury to the operator may result. 6 Preparation r 1 Unpacking Remove all packing materials. Check attached accessories and materials. Check if all accessories specified in the packing list are available. • .; .d Clean the freezer before using-.N Refer to section "Cleaning" _.••= Time lapse before power supply Connect the refrigerator to power source at least 30 minutes after the refrigerator is sited and cleaned. • • 0 Connection to power supply r Connecting the freezer to power supply for test operation. Temperature will go down 30 minutes later after connection to power supply if the freezer operates correctly. ./ • Power plug of the installed freezer should be always accessible. Ensure that the power cable is not depressed when the freezer is moved. oa • ing the freezer with food as regulated. Only load the freezer with frozen food or the food with rated weight as specified on the type plate of the freezer. Never place vegetables, bottled beverages or the food, which are not agreeable to ultralow temperature. 7