Haier CK25E CK25E Manual - Page 5
Dehumidifier
View all Haier CK25E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
DEHUMIDIFIER USE Setting the tuna ki.LO Starting/Stopping the Dehumidifier NOTE: Before turning on the dehumidifier, be sure that the bucket Is empty and fits all the way into the dehumidifier. Control Panel (Models CK25E,CK30E,CK30E-E ) NOTE: Minimum operating temperature is 41°F (5°C). 0* 0-4r 0 0 0 Jr 0 • 1-7r7 0 0 0 J I H A. Check Bucket indicator light Defrost indicator light B. High fan speed indicator light C. Low fan speed indicator light D. Time / Temperature and humidity level display E. °C/°F selector pad F. Down arrow pad G. Up arrow pad H. Timer pad I. Fan Speed pad J. Power on/offpad AWARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug into a grounded 3 prong outlet. 2. Press the Power on/off pad to turn on the dehumidifier. IMPORTANT: If the Check bucket indicator light comes on, the dehumidifier will not operate. Empty or adjust the bucket. 3. To turn off the dehumidifier, press the Power on/off pad. Check Bucket Indicator Light If this light is on, the dehumidifier is not running. This light indicates that you need to check on the following situations: • If the bucket is full, empty and reinstall bucket. • If the bucket is not in the correct position, remove the bucket and reinstall. Check that the bucket fits all the way into the dehumidifier and the light is off, or the dehumidifier will not run. Fan Speed The Fan Speed controls fan operation. • High -for faster moisture removal • Low -for quieter moisture removal Timer/Temperature and Humidity Level Display im The Timer/Temperature display will show the current room temperature while the dehumidifier is operating. • The Timer/Temperature display will show the Timer setting for 10 seconds. Then the display will show the current room temperature. ■ The Humidity Level display will show the set humidity level for 10 seconds. Then the display will show the current room humidity level. Humidity Level To set the humidity level, press the up arrow or down arrow pad to select the desired setting. NOTES: • The humidity level may be set between 30% and 90%. ■ The deicer will turn off the compressor if a low temperature condition exists. Pressing the up arrow or down arrow pad will not increase or decrease the amount of moisture removed. When the deicer senses the correct operating temperature, the compressor will cycle back on. • After 10 seconds, the Humidity Level display will show the current room humidity level. Timer Turn Off Dehumidifier Automatically 1. Turn on the dehumidifier. 2. Press the Timer pad. 3. Press the up arrow or down arrow pad to set the time to turn off the dehumidifier. Turn On Dehumidifier Automatically 1. Turn off the dehumidifier. 2. Press the Timer pad. 3. Press the up arrow or down arrow pad to set the time to turn on the dehumidifier. °OPF Selector Press this selector pad to switch between °C and °F. 4