Haier CPN10XC9 Product Manual - Page 10

English Remote Control Operation 0 I()I Power On / Off 0 7() Mode Cool: "j sign appears in LCD display when in cooling Dehumidification:[ sign appearsin LCD display when in dehumidification mode. Fan:IA sign appears in LCD display when in fan mode. Heat: ®sign appears in LCD display when in heat mode. (CPN10XH9 & CPN12XH9 Only) CE Fan Speeds There are 3 adjustable speeds in the cool and fan mode: Low, Medium and High. In dehumidification mode, and room temperature is greater than 77°F, fan speed can be adjusted; otherwise fan speed is fixed to "low." 0 I.J.1On / Off Timer To set the Timer for a 1 to 24-hour delay until the air conditioner turns off: 1. When you use the timer setting button while the unit is operating, you can preset a time for the unit to turn off. 2. When you use the timer setting button while the unit is on standby, you can present a time for the unit to turn on. 3. If you press the "ON/OFF" button, the preset timer function will be cancelled. 4. Timer setting range is 1-.24 hours. To clear Timer Delay program: NOTE: Air conditioner can be either on or off. 1. Press the Timer button. 2. Press and hold the minus button until the timer display has cleared. To change the remaining time (in hours): 1. Press the Timer button. 2. Press the plus or minus button to change the delay time from 1 to 24 hours. 3. The new delay time will display. • 0 0 ± =I Setting the Temperature To set the temperature, press the T orFlkey to raise or lower the temperature. The • temperature can be raised or lowered in the cool mode. The temperature cannot be adjusted in fan or dehumidification mode. • NOTE: The temperature can be set between 61°F to 89°F. 9