Haier CPN10XC9 Product Manual - Page 8
Operation
UPC - 688057348896
View all Haier CPN10XC9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Operation NOTE: Wait for 24 hours to turn on air conditioner if the unit has been tilted for any reason. This is for the oils and the coolants to settle and level off. 1. After a normal shut down, wait for 3 minutes before restarting the unit so as to complete the compressor cycle. 2. Use an 1 15v/15amp outlet for the air conditioner. Do not use any other electrical appliances on this line or you may trip the fuse. Use a dedicated line for this air conditioner. 3. Do not place the air conditioner in direct sunlight or close to any heating appliances (ie. baseboard heaters, stoves, etc.) 4. Operate on a flat surface only. 5. Keep the unit free of any obstructions such as drapes, curtains, blinds, etc. 6. Keep unit at least 1 foot away from the wall. 7. Check and clean the filter once every week for highest efficiency. NOTE: Do not use unit without filter. 8. If the unit is not being used for a long period of time, remove the plug from the water drain pipe and drain out any condensed water. When turning on the unit for the first time after plugging it into an electrical outlet, the unit will start in a low Fan cool mode. The temperature reading out on the LCD will be the current room temperature. When turning on the unit during regular usage, it will remember the last setting used. If you want to operate the air conditioner as a dehumidifier, then adjust to dehumidify mode. 7