Haier CPR09XC7 User Manual - Page 7
Assembly, Insta, ation
UPC - 688057347608
View all Haier CPR09XC7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English Assembly and Insta ation Accessories Include 1. Plastic panel - 3 pieces From 20"(50.5cm)up to 46" (116.8cm) 2. Window Panel Adaptor - 1 piece 3. Screws - 4 pieces 4. Heat Exhaust hose connector -2 pieces (4) 5. Heat Exhaust hose -1 piece 6. Cover - 1 piece if f 1. Adjust the Plastic Panel to the width or height of your window and tighten the 2 screws that are attached to the panel. 2. Push the round Window Panel Adapter through the rear of the Plastic Panel. Line up the holes and tighten the Adapter with 4 screws that are included in the kit. (Tighten screws from the front). 3. Install the Window Plastic Panel into the window. If necessary use duct tape to better secure the panel. 4. Connect exhaust hose to the unit by inserting the hose connector that is attached to the hose into the exhaust. (See Illustration A) 5. Move the unit to the window, extend the hose and attach the other end of the B hose to the window. Align the tabs on the hose and window panel adapters and fasten them together. •••"5 C " ; /, rV 0 Hose Connector 0 Exhuast Hos 0 Hose Connector 6