Haier CPR09XC7 User Manual - Page 8

Operation

Page 8 highlights

English Operation NOTE: Wait for 24 hours to turn on air conditioner if the unit has been tilted for any reason. This is For the oils and the coolants to settle and level off. 1. After a normal shut down wait for 3 minutes before restarting the unit so as to complete the compressor cycle. 2. Use an 115v /15 amp outlet for the air conditioner. Do not use any other electrical appliances on this line or you may trip the fuse. Use a dedicated line for this air conditioner. 3. Do not place the air conditioner in direct sunlight or close to any heating appliances (eg. baseboard heaters, stoves, etc). 4. Operate on a flat surface only. 5. Keep the unit free of any obstructions such as drapes, curtains, blinds, etc. 6. Keep unit at least 1 foot away from the wall. 7. Check and clean the filter once every week for highest efficiency. NOTE: Do not use unit without filter. 8. If the unit is not being used for a long period of time, remove the plug from the water drain pipe and drain out any condensed water. When turning on the unit for the first time after plugging it into an electrical outlet, the unit will start in a low fan cool mode. The temperature reading out on the LCD will be the current room temperature. When turning on the unit during regular usage, it will remember the last setting used. If you want to operate the air conditioner as a dehumidifier, then adjust to dehumidify mode. SETTING THE TEMPERATURE To set the temperature, press the + or the - key to raise or lower the temperature. The temperature can be raised or lowered in the cool or dry mode. The temperature cannot be adjusted in the fan mode. FAN SPEEDS There are 3 adjustable speeds in the cool and fan mode: Low, Medium & High. In the dry or dehumidification mode the fan will only operate at low speed. ON/OFF TIME SET The air conditioner has a 1-24 hour on/off built-in timer. To delay the start time for 1-24 hours at 1 hour intervals, simply press `Timer" key (or On/Off Timer Key) to adjust the start time. Note that the unit has to be plugged in to an electrical outlet for the timer to operate. To automatically shut-off the unit, press `Turner" key while the unit is running to adjust the shut-off time. The auto shut-off switch operates in all 3 modes: Cool, Dry & Fan. NOTE: The temperature can be set between 61*F to 89°F. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

English
Operation
NOTE:
Wait
for
24
hours
to
turn
on
air
conditioner
if
the
unit
has
been
tilted
for
any
reason.
This
is
For
the
oils
and
the
coolants
to
settle
and
level
off.
1.
After
a
normal
shut
down
wait
for
3
minutes
before
restarting
the
unit
so
as
to
complete
the
compressor
cycle.
2.
Use
an
115v
/15
amp
outlet
for
the
air
conditioner.
Do
not
use
any
other
electrical
appliances
on
this
line
or
you
may
trip
the
fuse.
Use
a
dedicated
line
for
this
air
conditioner.
3.
Do
not
place
the
air
conditioner
in
direct
sunlight
or
close
to any
heating
appliances
(eg.
baseboard
heaters,
stoves,
etc).
4.
Operate
on
a
flat
surface
only.
5.
Keep
the
unit
free
of
any
obstructions
such
as
drapes,
curtains,
blinds,
etc.
6.
Keep
unit
at
least
1
foot
away
from
the
wall.
7.
Check
and
clean
the
fi
lter
once
every
week
for
highest
efficiency.
NOTE:
Do
not
use
unit
without
filter.
8.
If
the
unit
is
not
being
used
for
a
long
period
of
time,
remove
the
plug
from
the
water
drain
pipe
and
drain
out
any
condensed
water.
When
turning
on
the
unit
for
the
first
time
after
plugging
it
into
an
electrical
outlet,
the
unit
will
start
in
a
low
fan
cool
mode.
The
temperature
reading
out
on
the
LCD
will
be
the
current
room
temperature.
When
turning
on
the
unit
during
regular
usage,
it
will
remember
the
last
setting
used.
If
you
want
to
operate
the
air
conditioner
as
a
dehumidifier,
then
adjust
to
dehumidify
mode.
SETTING
THE
TEMPERATURE
To
set
the
temperature,
press
the
+
or
the
-
key
to
raise
or
lower
the
temperature.
The
temperature
can
be
raised
or
lowered
in
the
cool
or
dry
mode.
The
temperature
cannot
be
adjusted
in
the
fan
mode.
FAN
SPEEDS
There
are
3
adjustable
speeds
in
the
cool
and
fan
mode:
Low,
Medium
&
High.
In
the
dry
or
dehumidification
mode
the
fan
will
only
operate
at
low
speed.
ON/OFF
TIME
SET
The
air
conditioner
has
a
1-24
hour
on/off
built-in
timer.
To
delay
the
start
time
for
1-24
hours
at
1
hour
intervals,
simply
press
`Timer"
key
(or
On/Off
Timer
Key)
to
adjust
the
start
time.
Note
that
the
unit
has
to
be
plugged
in
to
an
electrical
outlet
for
the
timer
to
operate.
To
automatically
shut-off
the
unit,
press
`Turner"
key
while
the
unit
is
running
to
adjust
the
shut-off
time.
The
auto
shut-off
switch
operates
in
all
3
modes:
Cool,
Dry
&
Fan.
NOTE:
The
temperature
can
be
set
between
61*F
to
89°F.
7