Haier DW12-CFE2S User Manual - Page 19
Switching the dishwasher ON, Switching the dishwasher OFF, End of programme, Interrupping
View all Haier DW12-CFE2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
en Switching the dishwasher ON Turn on the tap. Set ON-OFF button " A " to ON, the dishwasher beeps one time, All indicators "C1,C2,C3,C4,C5 " light . Press programme button "B1", programme indicator " C1" light. If the door is closed, after 3 seconds, the programme indicator " C1" will blink and the dishwasher beeps one time, then the programme starts automatically. A C1 C2 C3 C4 C5 B1 End of programme Six beeps will indicate that the wash cycle has finished and all the indicators light. Switching the dishwasher OFF Several minutes after the programme has ended: Set main switch "A" to OFF. Open the door . Remove dishes, etc. when they have cooled down. Interrupping the programme Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open the door fully until spray arm has stopped rotating. When you open the door, the dishwasher will beep ten times every thirty seconds. If the appliance has already heated up or the hot water was switched ON and then the appliance door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may open due to expansion. Switching the dishwasher OFF while underway: Press the ON-OFF button "A" and hold it in for about 3 seconds. In other situation, set main switch "A" to OFF. 18