Haier DW12-PFE1 User Manual - Page 18

Washing dishes en Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example: Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on hard. Earn savings If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates at the next lowest temperature will usually be sufficient. Programme data The stated programme data are based on standard operating conditions. The values can vary considerably according to: different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine-related factors (e.g. temperature, water volume,...) Switching the dishwasher ON Turn on the tap. Close the door after loading the appliance Set ON-OFF button " A " to ON. All the programme indicators "D1,D2,D3,D4,D5 " light . Press programme button "C1" , programme indicator " D1" light. After 3 seconds, the programme indicator " D1" bcomes to blink and the dishwasher beeps one time, then the programme starts automatically. A D1 D2 D3 D4 D5 C1 16