Haier DW12-PFE2 User Manual - Page 16
Washing dishes
View all Haier DW12-PFE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Washing dishes Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example: Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on hard. Earn savings If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates at the next lowest temperature will usually be sufficient. Programme data The stated programme data are based on standard operating conditions. The values can vary considerably according to: different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine-related factors (e.g. temperature, water volume,...) Energy and water consumption is reduced by up to 1/4 when dishes are washed in the upper basket only.The water consumption values are related to water hardness level 1. Switching the dishwasher ON Turn on the tap. Set ON-OFF button " A " to ON. All the programme indicators "J1,J2,J3,J4,J5,J6 " light . Press programme button "I1" , programme indicator " J1" blinks and the time-remaining indicator " F " displays the time of the programme.. If the door is closed, after 5 seconds, the programme indicator " J1" bcomes to light and the dishwasher beeps one time , then the programme starts automatically. A F J1 J2 J3 J4 J5 J6 I1 15