Haier DW9-CBE0 Instruction Manual - Page 9
How to fill rinse aid
View all Haier DW9-CBE0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
en It is recommended that adjustments be made in accordance with the following table: Water Hardness Level Clarke ºdH degrees mmol/l Selector position Salt Autonomy c o n s u m p t i o n (cycles/2kg) (Grams/cycle) 1 0 - 14 0 - 17 0 - 1,7 / 0 / 2 14 - 36 18 - 44 1,8 - 4,4 "-" 20 60 3 36 - 71 45 - 89 4,5 - 8,9 Middle 40 40 4 > 71 > 89 > 8,9 "+" 60 25 How to fill rinse aid Rinse aid This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door . Loading the rinse aid Regardless of the type of detergent dispenser installed on your appliance, you must proceed as indicated below when loading the rinse aid. To open the dispenser, turn the "1" cap in an anti-clockwise direction and then pour in the rinse aid, making sure not to 12 overfill. The amount of rinse aid used for each cycle can be regulated by turning the " 2" dose adjuster, located beneath the "1" cap, with a screwdriver. There are 6 different settings; the normal dosage setting is 3. Important Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, the dosage adjuster should be turned to a higher setting. If the dishes have white streaks, turn the dosage adjuster to a lower setting. 8