Haier ESA424J User Manual - Page 6
Prepare Window for Installation, Position Air Conditioner
View all Haier ESA424J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
NOTE: Cover putty knife blade with masking tape to guard against damage of the unit finish. Prepare Window for Installation 1. Measure the width of the window opening. 2. Mark the center line on the inside windowsill. A B A. Width of window opening B. Center line CAUTION:Never expose plastic front or grille to extreme temperatures. Assemble Curtain/Top channel NOTE: Attach curtains to the air conditioner before placing the air conditioner in window. 1. Install top channel with four 13/32" screws. 2. Slide left-hand curtain assembly into left end of top and bottom channel s. Repeat for right-hand curtain assembly. 3. Fasten curtain retainer strips to the sides of the outer case with six 13/32" screws.. AB Position Air Conditioner NOTES: Handle the air conditioner gently. Be sure your air conditioner does not fall out of the opening during installation or removal. The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded outlet. Do not block the louvers in the front panel. Do not block the louvers on the outside of the air conditioner. C D B A. Top channel C. 13/32" screws B. 13/32" screws D. Side curtains A C A. Side curtain against window channel B. Window sash behind top channel C. Bottom channel in behind windowsill NOTE: Your model may differ from the one shown. 6