Haier GDG750AW User Manual - Page 25
Custom Cycle, Touch Up Cycle
View all Haier GDG750AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English • The LED display indicates remaining time of a cycle. If setting "Wrinkle Saver" in standby status, the LED display indicates 3 hr, which will increase by 1 hr with each press (until 24 and return to 3). If held for 1.5 seconds, LED display indicated value will increase continuously. 7. Press "Start/Pause" button • When starting the machine, first close the door and then press this button. • If pause is needed during machine operation, press this button. Pressing again will resume operation. Autodry Cycle Remain Time Heavy Duty 60 Normal 52 Whites 65 Start/ Bulky 62 Pause Press Free 35 Delicate 35 Touch Up 25 Custom Timed 0-180 Dry 40 minutes Pass for Rack Dry 60 Sensor Dry Level very very very very very very N/A N/A N/A Temp High High High High Medium Low Low High Air Dry Signal Softer Softer Softer Softer Softer Softer Softer Softer Softer • Wrinkle saver 3-24 hours • Sensor Dry Levels: Very, More, Normal, Less, Damp • Temp Levels: High, Medium, Low, No Heat • Signal: Louder, Softer, Off Touch Up Cycle • You can use the "Touch Up" cycle to remove wrinkles from clean clothes packed tightly in a suitcase or closet. Custom Cycle • To store your desired settings for future use, the "Custom" function can be used. • The dryer can memorize programs defined by user and display the previous program upon next application of this function. Use details are as follows (Features may vary per model purchased) After powering on, press "Auto-Dry Cycles" until "Custom" status, then set "Timed-Dry Cycles" to Timed Dry or Rack Dry and set status of other buttons. Press "Start/Pause" button or after half a minute, the program defined by user will be stored and will be directly displayed upon next use. Note: The"Sensor Dry Level" button will be inactive during use of "Custom" function and "Touch Up" cycle. 24