Haier H2SM-18HC03 User Manual - Page 6

Parts and Functions Buttons and display of the remote controller. 25. SWING 26. SET Used to confirm timer and clock settings 27. HOUR Used to set clock and timer settings 1.Mode display AUTO COOL DRY HEAT FAN LOW MED HI AUTO 2. SWING display 3. FAN SPEED display 4. HEALTH display 5. SLEEP display 6. LOCK display 7. TIMER ON display 8. AUXILIARY HEAT display 9. HEALTH 10. MODE Used to select AUTO,COOL and FAN 11. CLOCK Used to set correct time 12. TIMER Used to select TIMER ON,TIMER OFF 13. RESET Used to reset the controller back to normal condition. 14. CODE Used to select code A or B with a press,A or B will be displayed on LCD.please select A without special explanation 15. CODE display 16. SIGNAL SENDING display 17. POWER/SOFT display 18. TEMP. display 19. CLOCK display 20. TIMER OFF display 21. TEMP Used to select your desired temperature 22. FAN Used to select fan speed 23. POWER ON/OFF Used for unit start or stop 24. SLEEP Used to select sleep mode NOTE:(1)The following functions and related displays are not available: AUXILIARY HEAT display, POWER/SOFT display, LOCK display. (2)If the Air conditioner don't have the function of the code ,press code B can cause it not available. (3)Cooling only unit do not have functions and displays related with heating. Clock set When unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: Press CLOCK button, "AM" or "PM" flashes. Press or to set correct time. Each press will increase or decrease 1min. If the button is kept depressed, time will change quickly. After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock starts working. Hints After replacing with new batteries, remote controller will conduct self-check, displaying all information on LCD. Then, it will become normal. 5