Haier H2SM-21HB03 User Manual - Page 21
Timer Function, Timer, Cancellation
View all Haier H2SM-21HB03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ON Timer Function With this function, the syste m starts operating after the designted period: the system can be set to turn on automatically at the time of awakening or arriving home. =GI =CD TEMP /OFF 1 MODE 2 4 3 RE$ET • I Press the ON/OFF switch Make sure that the operating conditions are those desired. 2 Set the timer mode to "ON" by pressing the timer mode switch. Make sure that the timer mode indicator of the indoor unit lights up. 3 Set the operating period by pressing the time setting switches. The operation period can be set from 1 hour to 12 hour by an hour. Timer Cancellation 4 Just press the timer mode switch several times until TIMER mode disappears. \._ 1 NOTICE • Once the wireless remote controller set the timer, the period is memorized. From next time, you can operate easily with operation of the ON/OFF switch and the timer mode switch. • After replacing the dry batteries, the designated period is set automatically as follows: OFF: 1 hour, ON: 6 hours.Set the timer again if necessary. • If the power fails, set timer again. Power Failure Resume Function • Only some of the models have this function. If the unit is started for the first time, the compressor will not start running unless 3 minutes have elapsed. When the power resumes after power failure, the unit will run automotically, the power indicator lights up, and 3 minutes later the compressor starts running with the indicator lighting up. 19