Haier HBU-18HD03 User Manual - Page 10

GUIDE TO OPERATION 2 4 3 1 TIMER operation Set Clock correctly before starting Timer operation. You can let unit start or stop automatically at following time: Before you wake up in the morning, or get back from outside or after you fall asleep at night. TIMER ON/OFF (1)After unit start, select your desired (3)Timer setting operation mode. Press TIME button. Operation mode will be displayed on LCD. Power indicator lights up. Every time the button is pressed, time increases 10min. If button is kept depressed, time will change quickly. (2)TIMER mode selection Every time the button is pressed, time decreases 10min. If button is kept depressed, time will change quickly. Press TIMER button to change TIMER mode. Every time the button is pressed, display changes Time will be shown on LCD. It can be adjusted within 24hours. as follows: (4)Confirming your ON ON OFF blank OFF After setting correct time, press SET button to confirm "ON" or "OFF" stops flashing. Time displayed: Unit starts or stops at x hour x min Select your desired TIMER mode (ON or OFF) (ON or OFF). Timer mode indicator lights up. To cancel TIMER Just press TIMER button several times until TIMER mode disappears. Hints Wire controller possesses memory function, when use TIMER mode next time, just press SET button after mode selecting if timer setting is the same as previous one. 9