Haier HBU-18HD03 User Manual - Page 12

GUIDE TO OPERATION Comfortable Sleep At night, before going to bed you can press down the SLEEP button on the controller and the air-conditioner will run by the comfortable sleeping mode to make you sleep more comfortable. SET F FO MA MA MODE FAN SWNIG TEMP CLOCK SET TMIER SLEEP FLITERESET RESET ON/OFF Press SLEEP button once to make the air conditioner have the previous- (first power-on is "1h"), the sleep symbol will appear. Press time button choose the time in 1~8 hours. Each press of / , the time increase and "xh" appears in the humidity setting part, "OFF" appears in "TIMER O and timer-off time; press SLEEP button again to cancel sleep function, t diappears. In cooling, dehumidifying mode One hour after sleeping operation start, the temp. is 1 C higher than the s another hour the temp. rises 1 C and then run continuously for another close. The actual temp. is higher than the setting one which is to preven cool to your sleep. In heating mode One hour after start up, the temp. decrease 2 C lower than the setting on hour decrease by more 2 C. The temperature will automatically rise by 1 C after another 3hrs' oper automatically close after 3hrs' continuous operation. The actral temperatu the setting one which is to prevent from being too hot to your sleep. Note: In AUTO mode, unit will run in SLEEP function according to the operation mode. After setting SLEEP function, it is forbidden to calibrate clock. If the set sleep-time does not reach 8 hours, the unit will stop operat after set time is complete. Set "TIMER-OFF" function first, then set SLEEP, and the sleep-set is TIMER-ON function first, the sleep function can only be set before TI theSLEEP function first, the TIMER function can not be set. SETTINGT 1hr SHUT DOWN decrease2C 1hr decreases2C abou3thrs 3hrs increase1C SLEEP RUN BEGINS SLEEP RUN STOPS Heat mode SLEEP RUN BEGINS abou6thrs SLEEP RUN STOPS 1hr SETTINGT 1hr increase1C increase1C SHUT DOWN 11 Cooling mode