Haier HBU-24HE03 User Manual - Page 12

GUIDE TO OPERATION AUTO RUN, COOL,HEAT and DRY operation Recommendations Use COOL in summer. Use HEAT in winter. Use DRY in spring,autumn and in damp climate. OTUA TES MA MODE FAN SWING 2 TEMP 4 3 CLOCK SET TIMER SLEP FILTERESET RESET 5 ON/OFF 1 (1) Unit start Press ON/OFF button, unit starts. Previous operation status appears on display (Not Timer setting). Power indicator lights up. (2) Select operation mode Press MODE button. For each press, operation mode changes as follows: AUTO COOL DRY HEAT FAN Unit will run in operation mode displayed on LCD. Stop display at your desired mode. (3) Select temp. setting Press TEMP button Every time the button is pressed, temp. setting increases 1 C. If button is kept depressed, temp.setting will increase quickly. Every time the button is pressed, temp. setting decreases 1 C. If button is kept depressed, temp. setting will decrease quickly. Unit will start running to reach the temp. setting on LCD. (4) Fan speed selection Press FAN button. For each press, fan speed changes as follows: AUTO LOW MID HIGH AUTO Unit runs at the speed displayed on LCD. In HEAT mode, warm air will blow out after a short period of time due to cold-draft prevention function. In DRY mode, when room temp. becomes 2 C higher than temp. setting, unit will run intermittently at LOW speed regardless of FAN setting. (5) Unit stop Press ON/OFF button. Only time and room temp remains on LCD. All indicators go out. Vertical flap closes automatically. Hints Wire controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status. 10