Haier HBU-24HE03 User Manual - Page 13

GUIDE TO OPERATION TES NO MA MA MODE FAN SWING TEMP CLOCK SET 2 TIMER SLEP 4 FILTERESET 3RESET ON/OFF 1 TIMER operation Set Clock correctly before starting Timer operation. You can let unit start or stop automatically at following time: Before you wake up in the morning, or get back from outside or after you fall asleep at night. TIMER ON/OFF (1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD. Power indicator lights up. (2)TIMER mode selection Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: ON ON OFF blank OFF Select your desired TIMER mode (ON or OFF) (3)Timer setting Press TIME button. Every time the button is pressed, time increases 10min. If button is kept depressed, time will change quickly. Every time the button is pressed, time decreases 10min. If button is kept depressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24hours. (4)Confirming your setting After setting correct time, press SET button to confirm "ON" or "OFF" stops flashing. Time displayed: Unit starts or stops at x hour x min (ON or OFF). Timer mode indicator lights up. To cancel TIMER mode Just press TIMER button several times until TIMER mode disappears. Hints Wire controller possesses memory function, when use TIMER mode next time, just press SET button after mode selecting if timer setting is the same as previous one. 11