Haier HBU-36CM03 User Manual - Page 18

GUIDE TO OPERATION Comfortable Sleep At night, before going to bed you can press down the SLEEP button on the controller and the air-conditioner will run by the comfortable sleeping mode to make you sleep more comfortable. Press SLEEP button once to make the air conditioner have the previous-set sleep time (first power-on is "1h"), the sleep symbol will appear. Press time button / , you can choose the time in 1~8 hours. Each press of / , the time increases/reduces 1 hour and "Xh" appears in the temperature setting part, "OFF" appears in "TIMER OFF" display part and tOFFimer-off AM time; press SLEEP button again to cancel sleep function, the sleep symbol disappears. In cooling, dehumidifying mode TEMP One the hour after sleeping operation start, setting one. After another hour the the temp. is temp. rises 1 1 C CSWINGa nhdOOiFNFgthheFerANn than run continuously for another 6 hrs' and then close. The actual temp. is higher than the setting one which is to prevent from beMOiDEng too cool to your sleep. In heating mode CLOCK SET TIMER SLEEP One hour after start up, the temp. decrease 2 C loweLOrCK tREhSEaT n the setting one. After another hour decrease by more 2 C. The temperature will automatically rise by 1 C after another 3 hrs' operation, and then automatically close after 3 hrs' continuous operation. The actual temperature is lower than the setting one which is to prevent from being too hot to your sleep. Note: In AUTO mode, unit will run in SLEEP function according to the operation mode. After setting SLEEP function, it is forbidden to calibrate clock. If the set sleep-time does not reach 8 hours, the unit will stop opera after set time is complete. Set " TIMER-OFF" function first, then set SLEEP, and the sleep-set set TIMER-ON function first, the sleep function can only be set before T theSLEEP function first, the TIMER function can not be set. After setting SLEEP, press CLOCK button to show the time; press T show the temperature; press again to change temperature. SETTING T SHUT DOWN 1 hr decrease 2 C 1 hr decreases 2 C about 3 hrs 3 hrs increase1 C SLEEP RUN BEGINS SLEEP RUN STOPS Heat mode SLEEP RUN BEGINS SLEEP RUN STOPS about 6 hrs 1 hr increase 1 C 1 hr SETTING T increase 1 C SHUT DOWN Cooling mode 16