Haier HCR17W HCR17 Manual - Page 6
Installing Your Refrigerator
View all Haier HCR17W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English INSTALLING YOUR REFRIGERATOR Unpacking Your Refrigerator 1. Remove all packaging material. This includes the foam base and all adhesive tape holding the refrigerator accessories inside and outside. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator. Leveling Your Refrigerator t: PVSSFGSJHFSBUPSIBTUXPMFWFMJOHMFHTXIJDIBSFMPDBUFEJOUIFGSPOUCPUUPN corners of your refrigerator. After properly placing your refrigerator in its final position, you can level your refrigerator. t-FWFMJOHMFHTDBOCFBEKVTUFECZUVSOJOHUIFNDMPDLXJTFUPSBJTFZPVS refrigerator or by turning them counterclockwise to lower your refrigerator. The refrigerator door will close easier when the leveling legs are extended. Proper Air Circulation t5 PFOTVSFZPVSSFGSJHFSBUPSXPSLTBUUIFNBYJNVNFGGJDJFODZJUXBTEFTJHOFE for, you should install it in a location where there is proper air circulation, plumbing and electrical connections. t5 IFGPMMPXJOHBSFSFDPNNFOEFEDMFBSBODFTBSPVOEUIFSFGSJHFSBUPS Sides 4 " (1 0 0 mm) Top 4 " (1 0 0 mm) Back 4 " (1 0 0 mm) Door Alignment 1. Remove the top hinge cover by using a flathead screwdriver. Place the head under the front edge of the cap and gently lift. 2. Loosen the top hinge screws using a Phillips head screw driver. " EKVTUUIFEPPSPSQVUBTQBDFSJOCFUXFFOBOE tighten the screws. 4. Replace the top hinge cover by aligning the rear of the cover with the rear of the hinge. Press firmly on the front of the cover until it snaps in place. fig. 1 5